HDMI to LVDS+eDP controller board V1

VGA+HDMI+DP to LVDS+eDP controller board V1

The main advantages of the HDMI to LVDS+eDP controller board V1 are:

  • Triple Signal Input, All-Scenario Compatibility
     
    Supports HDMI (digital HD) + VGA (analog RGB) + DP (digital high-def) triple inputs, compatible with CEC/DDC I2C protocols and VESA full-standard signals (480×272~2560×1600). Seamlessly connects to PCs, industrial hosts, and high-definition devices, no adapters needed.
     
    (Image: Triple input interface diagram + multi-device connection schematic)
     
  • Dual Output Interfaces, Wide Screen Adaptation
     
    Equipped with LVDS (dual 8bit, 30pin) + eDP (2lane/4lane, 20pin/30pin/40pin) dual output systems. Directly drives 3.3V/5V/12V small/medium-sized LCD screens with eDP or LVDS interfaces, eliminating additional adapter boards.
     
    (Image: Output interface layout diagram + screen compatibility list)
     
  • Dual Power Input + Wide Voltage Adaptation
     
    Dual power interfaces (PH2.0-4PIN socket + DC JACK) for redundant backup, input voltage 8V~25V DC (typical 12V, ±10% tolerance). Adapts to industrial power supplies, common adapters, and complex power environments.
     
    (Image: Dual power interface diagram + voltage range infographic)
     
  • High-Fidelity Audio Output, Integrated Experience
     
    Built-in 3W×2 stereo power amplifier, with left/right channel speaker output (PH2.0-4PIN interface) and audio input/output interface. Supports synchronous audio transmission with video, suitable for multimedia display scenarios.
     
    (Image: Audio interface diagram + sound quality test data)
     
  • Industrial-Grade Reliability, Harsh Environment Adaptation
     
    Operating temperature -20℃~+70℃ (main chip excluded: -30℃~+70℃), MTBF >100,000 hours. Equipped with Japanese EMC filter components, ESD protection, and PCB mounting hole grounding design, passing EN55032 RE-Class B certification.
     
    (Image: Environmental test data chart + anti-interference certification logo)
     
  • Intelligent Backlight Control, Energy-Saving & Eye-Caring
     
    Built-in LED backlight driver, supporting 5V/12V (default 12V) backlight power supply and 9~25V voltage drive. PWM duty cycle 0~100% stepless dimming (BL-EN/BL-PWM: 0.1~5V), standby power <0.5W.
     
    (Image: Backlight dimming effect comparison + power consumption test data)
     
  • Dual-Control OSD + Multi-Language Support
     
    Digital buttons (PH2.0-12PIN + Molex 1.25mm-12PIN interfaces) + infrared remote control dual control. Visual OSD menu supports English/Chinese, with 12+ parameter adjustments (brightness/contrast/color temperature/flip), parameters auto-saved.
     
    (Image: OSD menu interface mockup + remote control function diagram)
     
  • Standardized Design, Easy Integration
     
    Overall size 109.5mm×60mm×16.5mm, standard mounting hole spacing 43.5×100mm (M3 screw compatible). Component side reserved ≥10mm, back side ≥5mm installation space, suitable for embedded devices and industrial control cabinets.
     
    (Image: Installation dimension diagram + standard mounting positioning chart)
     
  • Rich Protection Mechanisms, Safe & Durable
     
    Power supply short-circuit protection (auto-recovery), independent GND pins for signal isolation, and ESD ±8kV (contact)/±15kV (air) protection. Prevents circuit burnout from wrong wiring and reduces signal crosstalk.
     
    (Image: Protection mechanism schematic + wrong wiring prevention tips)
     
  • True Color Display, Professional Level
     
    24-bit color depth (16.7M colors), supports Gamma adjustment (1.8/2.0/2.2/2.4) and multiple color temperature modes (sRGB/User). Restores true colors, meeting commercial and industrial display requirements.
     
    (Image: Color gamut test chart + true color restoration effect)
     
  • Plug-and-Play, Low Installation Threshold
     
    3-step setup: connect signal source → power supply → screen. Interfaces with keyway positioning and clear labels, supporting automatic signal recognition, completing deployment in 5 minutes.
     
    (Image: 3-step installation flow diagram + interface keyway close-up)
     
  • Ample Expansion Interfaces, Future-Proof
     
    Reserved backup VGA input (PH2.0-12PIN, default NC), 5V/2A + 12V/2A power output interfaces, and IIC communication interface. Supports external ambient light sensors, touch modules, and other expansion devices.
Dimension Details (Unit: mm)
drawing of VGA+HDMI+DP to LVDS+eDP controller board V1

Dimension Details of HDMI to LVDS+eDP controller board V1

Dimension TypeSpecific SpecificationsDrawing Marking
Overall DimensionsLength 109.5 × Width 60.0 × Height 16.5Front/side/top three-view drawings (marked length, width, height)
Mounting Hole SpecificationsStandard spacing 43.5×100mm, aperture compatible with M3 screws; PCB mounting holes connected to groundMounting hole distribution diagram (marked hole center coordinates and grounding connection)
Key Interface Spacing

– HDMI (CN7) center to board edge: 29.3mm; DP (CN13) center to board edge: 70.5mm; VGA (CN8) center to board edge: 95.2mm

 

– eDP (CN14/15/16) center to board edge: 22.5mm; LVDS (CN22) center to board edge: 17.8mm

Interface layout dimension map (marked relative positions of each interface)
Installation Space Requirements

– Component side: ≥10mm (heat dissipation space)

 

– Back side: ≥5mm (installation gap)

 

– Around interfaces: ≥8mm (wiring space)

Installation space section view (marked reserved gaps and heat dissipation direction)
 
 
Core Technical Parameters

 

Parameter CategorySubcategoryCore SpecificationsTest Standards/Notes
Basic InformationModel/VersionYD2686DHV-V1 (Version:A1; P/N:V860102019)–
 Weight/Size≤90g (motherboard only); 109.5mm×60mm×16.5mmWithout external connectors
Input SignalsHDMI Input (CN7)Interface: HDMI-19pin 90° gold-plated socket; Resolution: 480×272~2560×1600@60Hz; Key Pins: Pin1=Data2+, Pin3=Data2-, Pin15=SCL, Pin16=SDA, Pin19=HPDSupports HDMI 1.4 standard
 DP Input (CN13)Interface: DP 20Pin female socket (DisplayPort); Resolution: Up to 2560×1600; Key Pins: Pin1=Data3+, Pin3=Data3-, Pin15=AUX_P, Pin18=HPDSupports DP MST mode
 VGA Input (CN8)Interface: DB15FLC blue female header (with screws); ESD Grade 3; Resolution: Up to 2560×1600; Key Pins: Pin1=RED, Pin2=GRN, Pin3=BLU, Pin13=HSYNC, Pin14=VSYNCBackup VGA: CN9 (PH2.0-12PIN, default NC)
Output InterfacesLVDS Output (CN22)Interface: 2×15P 30Pin 2.0pitch socket; Output: Dual 8bit; Key Pins: Pin1/2/3=VCC (3.3V/5V/12V), Pin7=TXO0-, Pin8=TXO0+, Pin15=TXOC-, Pin16=TXOC+Channel isolation design
 eDP Output

– CN14: 2×10P 20Pin socket (default NC)

 

– CN15: FFC0.5mm-30pin flip socket

 

– CN16: FFC0.5mm-40pin flip socket

 

– Output: 2lane/4lane

Supports eDP Hot plug Detect
Power SupplyInput Voltage/Current8V~25V DC (typical 12V); Min:0.15A, Nominal:0.17A, Max:0.25AMotherboard only test data
 Screen Power Supply3.3V/5V/12V (CN5 jumper selectable: 1-2=3.3V, 3-4=5V, 5-6=12V)Load capacity:1.2A@3.3V, 2.5A@5V, 3.5A@12V
 Power Ripple/Standby Power12V≤400mV, 5V≤200mV, 3.3V≤150mV, 1.1V≤100mV; Standby power <0.5WFull load measurement
Backlight DriveDrive Voltage/Dimming5V/12V (default 12V); 9~25V external drive; PWM duty cycle 0~100%BL-EN/BL-PWM:0.1~5V
 Backlight Interface (CN6)PH2.0-6PIN socket; Pin1/2=GND, Pin3=PWM/Vadj, Pin4=ON/OFF, Pin5/6=+12V/5VInverter power supply
Display PerformanceColor Depth/Resolutions24-bit (16.7M colors); Supported resolutions:480×272,800×600,1920×1200,2560×1600All VESA standard resolutions
 OSD AdjustmentBrightness/Contrast:0~100; Gamma:1.8/2.0/2.2/2.4; Flip:0°/90°/180°/270°; Language:English/ChineseParameters auto-saved
Control & ProtectionControl MethodsOSD buttons + infrared remote; Communication: Digital buttons, IRRemote custom code: Nec 03FC
 Protection MechanismsShort-circuit protection, ESD protection, grounding designIEC 61000-4-2 standard
Environmental AdaptabilityOperating/Storage TemperatureOperating: -20℃~+70℃ (motherboard), -30℃~+70℃ (except main chip); Storage: -40℃~+70℃No condensation
 Humidity/Atmospheric PressureOperating:10~95%RH (40℃,95%RH); Storage:10~100%RH; Pressure:70kPa~106kPa0~3000m altitude
 MTBF>100,000 hoursMIL-HDBK-217F standard
 
Connector & Pinout Details
 
Interface IDConnector TypePurposeKey Specifications
CN3/CN23PH2.0-4PIN, 2.0Pitch, single-row 180° socket12V DC Power InputPin1/2=+12V (±10%), Pin3/4=GND
CN4DC JACK (5521), positive inside/negative outside12V DC Power InputPositive φ2.0mm, negative φ5.5mm; Pin1/2=+12V, Pin3/4=GND
CN7HDMI-19pin, 90° gold-plated Taiwan socketHDMI Signal InputPin1=Data2+, Pin3=Data2-, Pin7=Data0+, Pin9=Data0-, Pin15=SCL, Pin16=SDA, Pin19=HPD
CN13DP 20Pin female socket (DisplayPort)DP Signal InputPin1=Data3+, Pin3=Data3-, Pin15=AUX_P, Pin17=AUX_N, Pin18=HPD, Pin20=PWR
CN8DB15FLC female header, blue with screwsVGA Signal Input (standard)Pin1=RED, Pin2=GRN, Pin3=BLU, Pin13=HSYNC, Pin14=VSYNC, Pin15=VGA_DDC_SCL
CN9PH2.0-12PIN, 2.0Pitch, single-row 180° socketVGA Signal Input (backup, default NC)Pin1=VGA_SCL, Pin2=VGA_SDA, Pin4=BLU, Pin6=GRN, Pin8=RED, Pin10=HSYNCIN
CN222×15P 2.0pitch dual-row 180° socketLVDS Signal OutputPin1/2/3=VCC (3.3V/5V/12V), Pin7=TXO0-, Pin8=TXO0+, Pin15=TXOC-, Pin16=TXOC+, Pin19=TXE0-, Pin20=TXE0+
CN15FFC0.5mm-30pin flip socketeDP Signal OutputPin3=eDP1N/1-, Pin4=eDP1P/1+, Pin6=eDP0N/0-, Pin7=eDP0P/0+, Pin17=EDP_HPD
CN16FFC0.5mm-40pin flip socketeDP Signal OutputPin3=eDP3N/3-, Pin4=eDP3P/3+, Pin6=eDP2N/2-, Pin7=eDP2P/2+, Pin17=EDP_HPD
CN142×10P 2.0pitch dual-row 180° socketeDP Signal Output (default NC)Pin5=eDP0N/0-, Pin6=eDP0P/0+, Pin7=eDP1N/1-, Pin8=eDP1P/1+
CN1/CN12PH2.0-12PIN / Molex 1.25mm-12PIN socketOSD Control InterfacePin1=IR, Pin4=I/O(Source), Pin5=I/O(Menu), Pin7=I/O(Left), Pin8=I/O(Right), Pin12=I/O(Power)
CN6PH2.0-6PIN, 2.0Pitch, single-row 180° socketInverter InterfacePin1/2=GND, Pin3=PWM/Vadj, Pin4=ON/OFF, Pin5/6=+12V/5V (default 12V)
CN11PH2.0-4PIN, 2.0Pitch, single-row 90° socketSpeaker OutputPin1=OUT_L-, Pin2=OUT_L+, Pin3=OUT_R-, Pin4=OUT_R+
CN20PH2.0-4PIN, 2.0Pitch, single-row socketAudio In/OutPin1=AUDIO-R, Pin2=GND, Pin3=AUDIO-L, Pin4=GND
CN52×3P 2.0Pitch dual-row pinLCD Screen Power Selection1-2=3.3V, 3-4=5V, 5-6=12V

Recent interface converter

Scroll to Top