YD2680HV-V11 HDMI+VGA to LVDS Controller Board Product Specification
The YD2680HV-V11 is a high-performance industrial-grade HDMI+VGA to LVDS display driver board, expertly engineered for TFT LCD and various flat panel display applications. Boasting excellent EMC characteristics, wide voltage and temperature adaptability, and high integration, this board integrates a T-CON circuit, LED backlight drive circuit, and 3W×2 stereo power amplifier, enabling direct drive of small and medium-sized LVDS/TTL LCD screens without a built-in T-CON. It supports multi-signal input including HDMI digital HD and VGA analog RGB, with a wide resolution adaptation range of 480×272 to 1920×1200, and features flexible screen power supply selection, convenient KEY button + infrared remote control, and visual OSD menu operation. With a long MTBF of over 100,000 hours and stable performance in harsh industrial environments, it is an ideal professional solution for industrial display, commercial display, and embedded system display applications.
Core Product Features
- Multi-signal Input : Supports HDMI digital HD, VGA analog RGB, and is compatible with PAL/NTSC composite video (NC by default), perfectly adapting to VESA standard signals.
- Wide Resolution Adaptation : Supports LCD screen resolutions from 480×272 to 1920×1200, covering mainstream specifications such as 640×480, 1024×768 and 1920×1080.
- Industrial-grade Performance : Operating temperature ranges from -20℃ to +70℃, storage temperature from -40℃ to +70℃, MTBF > 100,000 hours, and wide voltage input of 8V~25V (typical value 12V).
- High Integration : Built-in LED backlight drive circuit (9~25V voltage drive), T-CON circuit and 3W×2 stereo power amplifier, supporting backlight brightness adjustment via PWM duty cycle.
- Flexible Screen Power Supply : 3.3V/5V/12V screen power supply can be manually selected via J1 jumper, adapting to different specifications of LVDS interface TFT LCD screens.
- Convenient Control : Equipped with physical KEY buttons + infrared remote control reception, visual OSD menu supporting 10 national languages, parameters are automatically saved after adjustment for easy operation.
- Rich Expansion Interfaces : Includes 30pin LVDS dual output, 5V/2A power output, I2C communication interface, etc. The screw hole spacing is 77×71mm for convenient industrial installation.
- Excellent EMC Performance : With built-in EMC filter interface and PCB mounting hole grounding design, it has strong anti-interference ability and is suitable for industrial environments.
Full User Manual & Datasheet Download : YD2680HV-V11 Official Specification PDF
Dimension Details (Unit: mm)
| Item | Specification | Unit |
|---|---|---|
| Model | YD2680HV-V11 | – |
| P/N No. | V08602009 | – |
| Version | A1.1 | – |
| Board Length×Width×Height | 78×84×7.9 | mm |
| PCB Thickness | 1.6 | mm |
| Maximum Board Height | 6.3 | mm |
| Screw Mounting Hole Spacing | 77×71 | mm |
| Mounting Hole Specification | M3×4 | – |
Interface Definition Details
| Category | Specification | Minimum | Typical | Maximum | Unit | Remarks |
|---|---|---|---|---|---|---|
| Basic Info | Model | YD2680HV-V11 | – | – | – | – |
| P/N No. | V08602009 | – | – | – | – | |
| Version | A1.1 | – | – | – | – | |
| Power Supply Parameters | Wide Voltage Input | 8 | 12 | 25 | V | Industrial wide voltage adaptation |
| 12V Test Point Voltage | 10.8 | 12 | 13.2 | V | Ripple ≤400mV | |
| 5V Test Point Voltage | 4.75 | 5 | 5.25 | V | Ripple ≤200mV, 5V/2A output | |
| 3.3V Test Point Voltage | 3.13 | 3.25 | 3.46 | V | Ripple ≤150mV | |
| 1.8V Test Point Voltage | 1.70 | 1.75 | 1.85 | V | Ripple ≤100mV | |
| Board Working Current | 0.02 | 0.1 | 0.3 | A | No-load condition | |
| Standby Power Consumption | – | <0.8 | – | W | Low power standby | |
| Display Parameters | Display Color | 24Bit (3×8), 16.7M true color | – | – | – | – |
| Output Interface Type | LVDS 8BIT, TTL 18bit/24bit | – | – | – | 30pin LVDS dual output | |
| Supported Resolution Range | 480×272 ~ 1920×1200 | – | – | – | Compatible with VESA standard | |
| LCD Screen Power Supply Voltage | 3.3/5/12 | – | – | V | Selectable via J1 jumper, ±5% precision | |
| Maximum Display Load Capacity | 1.8A@3.3V 2.5A@5V 3.5A@12V | – | – | A | Normal temperature condition, 12V screen limited by power supply | |
| Audio Parameters | Audio Output | 3W×2 stereo power amplifier | – | – | W | Left and right dual channels |
| Backlight Parameters | Backlight Drive Voltage | 9 | – | 25 | V | For small and medium-sized LED backlight |
| Backlight Adjustment Method | PWM duty cycle adjustment | – | – | – | Brightness adjustable from 0 to 100 | |
| Backlight Enable Voltage | 0.1 | – | 4.8 | V | BL-EN valid signal | |
| Working Environment | Operating Temperature | -20 | – | +70 | ℃ | -30~70℃ except main chip |
| Storage Temperature | -40 | – | +70 | ℃ | Industrial storage standard | |
| Operating Humidity | 10 | – | 95 | %RH | No condensation at 40℃ | |
| Storage Humidity | 10 | – | 100 | %RH | No condensation | |
| Operating Atmospheric Pressure | 70 | – | 106 | kPa | Adapt to high altitude environment | |
| Performance Parameters | Mean Time Between Failures (MTBF) | >100000 | – | – | Hour | Industrial-grade reliability |
| Communication Interface | Digital button, infrared IR, I²C | – | – | – | Multi-mode control | |
| EMC Performance | Built-in EMC filter interface, anti-interference design | – | – | – | Suitable for industrial scenarios |
LVDS Output Interface CN5 (30pin, Core)
| Pin | Signal | Description | Pin | Signal | Description |
|---|---|---|---|---|---|
| 1-3 | VCC | 3.3V/5V(±5%) screen power supply | 4 | NC | No pin |
| 5-6 | GND | Ground | 7-8 | TXO0-/+ | Odd channel 1 output -/+ |
| 9-10 | TXO1-/+ | Odd channel 2 output -/+ | 11-12 | TXO2-/+ | Odd channel 3 output -/+ |
| 13-14 | GND | Ground | 15-16 | TXOC-/+ | Odd channel clock output -/+ |
| 17-18 | TXO3-/+ | Odd channel 4 output -/+ | 19-20 | TXE0-/+ | Even channel 1 output -/+ |
| 21-22 | TXE1-/+ | Even channel 2 output -/+ | 23-24 | TXE2-/+ | Even channel 3 output -/+ |
| 25-26 | GND | Ground | 27-28 | TXEC-/+ | Even channel clock output -/+ |
| 29-30 | TXE3-/+ | Even channel 4 output -/+ | – | – | – |
12V Power Input Interface CN1 (4P, Main Power Supply)
| Pin | Signal | Description | Pin | Signal | Description |
|---|---|---|---|---|---|
| 1 | +12V | 12V DC input (±10%) | 2 | +12V | 12V DC input (±10%) |
| 3 | GND | Ground | 4 | GND | Ground |
OSD Button Interface CN3 (12P, Control Core)
| Pin | Signal | Function Description | Pin | Signal | Function Description |
|---|---|---|---|---|---|
| 1 | IR | Infrared remote control reception | 2 | GND | Ground |
| 3 | VCC-5V | 5V power supply (button/infrared) | 4 | I/O(Source) | Signal source selection/exit key K1 |
| 5 | I/O(Menu) | Menu/confirm key K2 | 6 | Auto | Reserved NC, no function |
| 7 | I/O(Left) | Left adjust/parameter decrease key K4 | 8 | I/O(Right) | Right adjust/parameter increase key K5 |
| 9 | GND | Ground | 10 | LED_GRN | Green working indicator light |
| 11 | LED_RED | Red standby/no signal indicator light | 12 | I/O(Power) | Power/standby key K6 |
HDMI Input Interface CN12 (19pin, Digital HD)
| Pin | Signal | Description | Pin | Signal | Description |
|---|---|---|---|---|---|
| 1 | Data2+ | HDMI Data2+ | 2 | GND | Ground |
| 3 | Data2- | HDMI Data2- | 4 | Data1+ | HDMI Data1+ |
| 5 | GND | Ground | 6 | Data1- | HDMI Data1- |
| 7 | Data0+ | HDMI Data0+ | 8 | GND | Ground |
| 9 | Data0- | HDMI Data0- | 10 | Clock- | HDMI Clock- |
| 11 | GND | Ground | 12 | Clock+ | HDMI Clock+ |
| 13-14 | NC | No pin | 15 | SCL | DDC I2C Clock |
| 16 | SDA | DDC I2C Data | 17 | GND | Ground |
| 18 | +5V | 5V Power Supply | 19 | HPD | Hot Plug Detect |
Jumper Settings (Only J1, Easy Operation)
The controller board is equipped with only one set of core jumpers J1 for selecting the LCD screen power supply voltage, without additional DIP switches, featuring simple setting and low error rate. The details are as follows:
| Jumper Short Connection Method | Corresponding Function | Applicable Screen Type |
|---|---|---|
| Pins 1-2 short connection | 3.3V power supply selection for LCD screen | 3.3V power supply LVDS interface TFT LCD screen |
| Pins 3-4 short connection | 5V power supply selection for LCD screen | 5V power supply LVDS interface TFT LCD screen |
| Pins 5-6 short connection | 12V power supply selection for LCD screen | 12V power supply LVDS interface TFT LCD screen |
Note: Power off before jumper setting, and operate after confirming the nominal power supply voltage of the screen. Incorrect setting may damage the LCD screen.
Indicator Light Status Description
The OSD menu supports five main menus: Color Adjustment, Picture Adjustment, OSD Setting, Function Setting and Sound Adjustment. Parameters are automatically saved after adjustment and will not be lost after power off. The core functions are as follows:
- Color Adjustment : Backlight brightness (0~100), signal brightness (0~100), contrast (0~100), color temperature (6500K/9300K/custom RGB 0~255). Color temperature adjustment is only valid for VGA signal.
- Picture Adjustment : Auto calibration (only valid for VGA), horizontal position (0~100), vertical position (0~100), phase (0~63), clock (0~100), solving the problem of VGA signal picture offset/blur.
- OSD Setting : 10 national language switching (including Simplified Chinese/English), menu position (horizontal/vertical 0~100), menu timeout (5~60s), menu transparency (1-7/Off).
- Function Setting : Factory reset, display ratio (16:9/4:3/AUTO), blue screen on/off, picture sharpness (0~100), picture flip (0-3 gears, up/down/left/right flip, subject to screen support).
- Sound Adjustment : Volume (0~100), mute on/off, adapting to the onboard 3W×2 stereo power amplifier.