5-inch 800x480 lcd display, RGB interface TN mode
5-inch 800×480 lcd display, RGB interface TN mode, 16.7M colors, using TN display technology, 12 clock direction
Main parameters of 5-inch TFT LCD
| ITEM | Standard value | UNIT |
| LCD SIZE | 5 | INCH |
| LCD Type | TFT Negative Transmissive | — |
| Driver Element | a-Si TFT Active matrix | — |
| Number of Dots | 800*(RGB)*480 | Dots |
| Pixel Arrangement | RGB Vertical Stripe | — |
| Pixel Pitch (W*H) | 0.135*0.135 | mm |
| Active Area | 108*64.8 | mm |
| Viewing Direction | 12 clock | — |
| Control IC | ILI6122 | — |
| Module Size(W*H*T) | 121.1(W)*76.2(H)*4.75(T) | mm |
| Back Light | White LED | |
Download relevant technical documents
FPC/cable/interface customization
Customize the length, width and thickness of FPC or cable, adjust the pin arrangement according to the interface type, and select the appropriate connector. Make your display or circuit board simple and safe with an excellent FPC solution.
Touch screen or cover glass added
A touch screen can be added according to your requirements, there are three options: resistive touch screen, capacitive touch screen, infrared touch screen. Or add protective glass as needed
Customized Display Optical Parameters
Display screens with different optical parameters can be designed according to needs, such as brightness, color gamut, response time, gamma and other parameters, and anti-glare, anti-fingerprint coatings, etc. can also be added
Customized HDMI to MIPI, RGB, LVDS boards
The circuit board we designed can convert the interface of your display into an HDMI interface. If your product does not have any display control capabilities, you can use our serial display and only need to use simple commands to control the displayed content through RS232/458
5-inch tft display drawings and interfaces
This 5.0-inch 800×480 lcd module is a transmissive normally white color active matrix display with a-Si TFT technology, driven by ILI6122 + ILI5960 and equipped with FT5426 capacitive touch panel. It features RGB 24-bit parallel interface, full viewing angles, 430 cd/m² typical brightness, and 18-piece white LED backlight. Operating at -20℃~+70℃, it is ideal for car navigation, video systems, digital devices, and industrial HMI applications.
Technical Specifications of 5-inch 800x480 lcd display
- Product Model: 5.0-inch TFT LCD Module
- Panel Size: 5.0 inch
- Resolution: 800(RGB) × 480
- Display Mode: Transmissive, Normally White
- Pixel Arrangement: RGB Vertical Stripe
- Pixel Pitch: 0.135 × 0.135 mm
- Driver IC: ILI6122 + ILI5960
- Touch IC: FT5426 (CTP)
- Interface: RGB 24-bit (FPC 40PIN)
- Connector: FH12-40S-0.5SH
- Active Area: 108.00 × 64.80 mm
- Outline Dimensions: 121.10 × 76.20 × 4.75 mm
- Viewing Direction: ALL (full viewing angle)
The drawing of 5-inch 800x480 lcd display,
| Item | Specification | Unit |
|---|---|---|
| Diagonal Size | 5.0 | inch |
| Outline (W×H×D) | 121.10 × 76.20 × 4.75 | mm |
| Active Area (W×H) | 108.00 × 64.80 | mm |
| Pixel Pitch | 0.135 × 0.135 | mm |
| FPC Pitch | 0.5 | mm |
Power Supply & Backlight Specifications of 5-inch 800x480 lcd display
| Parameter | Min | Typ | Max | Unit |
|---|---|---|---|---|
| Digital Supply Voltage (VDD) | 3.0 | 3.3 | 3.6 | V |
| Supply Current (IDD) | — | 22.0 | — | mA |
| LED Forward Current (IF) | — | 60 | — | mA |
| LED Forward Voltage (VF) | — | 19.2 | 21.0 | V |
| LED Lifetime | — | 30000 | — | Hr |
Interfaces of 5-inch 800x480 lcd display
| Pin | Symbol | detail |
| 1 | LEDK | Power supply Cathode input for backlight |
| 2 | LEDA | Power supply Anode input for backlight |
| 3 | GND | Ground |
| 4 | VCI | Power supplyto the internal Analog(2.65V-3.3V) |
| 5-12 | R0-R7 | Data bus for red |
| 13-20 | G0-G7 | Data bus for green |
| 21-28 | B0-B7 | Data bus for blue |
| 29 | GND | Ground |
| 30 | CLK | Dot clock signal for RGB interface operation |
| 31 | DISP/NC | Not connect |
| 32 | HSYNC | Line synchronizing signal for RGB interface operation |
| 33 | VSYNC | Frame synchronizing signal for RGB interface operatione |
| 34 | DE | ata enable signal for RGB interface operation |
| 35 | SDO | Serial data output pin used for the SPI Interface |
| 36 | GND | Ground |
| 37 | RESET | Reset signal pin |
| 38 | SDA | Serial data input pin in serial bus system interface |
| 39 | SCLK | SCL: Serial clock input for SPI interface. |
| 40 | CS | Chip select pin |