5.5-inch 720x1280 HD tft display,Rectangular display
5.5-inch 720×1280 tft display module is widely used in various equipment, the interface is MIPI.
Main parameters of 5.5inch tft display
| ITEM | Standard value | UNIT |
| LCD SIZE | 5.5 | INCH |
| LCD Type | A-Si TFT | — |
| Display mode | Normal Black | — |
| Number of Dots | 720(H)x3(RGB)x1280(V) | Dots |
| Color configuration | RGB Vertical Stripe | — |
| Pixel Pitch (W*H) | 0.0945(H)x0.0945 (V) | mm |
| Active Area | 68.04(H)x120.96(V) | mm |
| Viewing Direction | ALL | — |
| Support color | 16.7M | — |
| Module Size(W*H*T) | 73.85(H)x149.7(V)x2.725(T) | mm |
| Approx. Weight | TBD | g |
| Back Light | White LED | |
Download relevant technical documents
ST7703 data sheet for small lcd display
Specification of 5.5-inch small lcd display
initial code for 5.5-inch small lcd display
drawing of 5.5-inch small lcd display
FPC/cable/interface customization
Customize the length, width and thickness of FPC or cable, adjust the pin arrangement according to the interface type, and select the appropriate connector. Make your display or circuit board simple and safe with an excellent FPC solution.
Touch screen or cover glass added
A touch screen can be added according to your requirements, there are three options: resistive touch screen, capacitive touch screen, infrared touch screen. Or add protective glass as needed
Customized Display Optical Parameters
Display screens with different optical parameters can be designed according to needs, such as brightness, color gamut, response time, gamma and other parameters, and anti-glare, anti-fingerprint coatings, etc. can also be added
Customized HDMI to MIPI, RGB, LVDS boards
The circuit board we designed can convert the interface of your display into an HDMI interface. If your product does not have any display control capabilities, you can use our serial display and only need to use simple commands to control the displayed content through RS232/458
5.5-inch tft display drawings and interfaces
This 5.5-inch HD IPS lcd module is a high-performance display unit with 720×1280 resolution (RGB stripe pixel arrangement), driven by the ILI9881C control IC. Featuring an IPS transmissive design, full viewing angles (all directions), and 16.7M color depth, it supports MIPI DSI 4-Lane interface and dual power supply voltages (VCC=2.8V typ., IOVCC=1.8V typ.). Equipped with 12 white LED backlights (19.2V typ. forward voltage), it operates in a wide temperature range (-20℃~+70℃) and is designed without a touch panel. Suitable for high-definition portable devices, industrial control panels, smart terminals, and multi-scenario display applications, it offers stable performance, vivid color reproduction, and reliable environmental adaptability.
5.5 -inch 720 x1280 tft display Basic Parameters
- Product Model: 5.5HD (LZ55013H1 MS-LZ5503H-A)
- Panel Size: 5.5 inch
- Resolution: 720(H)×3(RGB)×1280(V) pixels
- Display Type: TFT, Transmissive, IPS, 16.7M colors
- Viewing Direction: All directions (full viewing angles)
- Driver IC: ILI9881C
- Interface Type: MIPI DSI (4 data lanes + 1 clock lane)
- Touch Panel: Without
- Active Area (LCD A/A): 68.04(W)×120.96(H) mm
- Module Outline Dimensions: 70.94(W)×129.56(H)×1.65(D) mm (tolerance ±0.15mm, excluding adhesive and FPC)
- Pixel Pitch: 0.0945(W)×0.0945(H) mm
- Connection Type: FPC ,FPC bending required for shipment)
- RoHS Compliance: Yes
5.5 -inch 720 x1280 tft display Power Specifications
| Parameter Category | Details | Min. (V) | Typ. (V) | Max. (V) | Unit |
|---|---|---|---|---|---|
| Logic Power Supply (VCC) | – | 2.6 | 2.8 | 3.3 | V |
| I/O Power Supply (IOVCC) | – | 1.65 | 1.8/2.8 | 3.3 | V |
| LED Forward Voltage (VLED) | Total for 12 LEDs (If=40mA) | – | 19.2 | – | V |
| LED Forward Current (If) | Total for backlight | – | 40 | – | mA |
| Logic & LCD Supply Current (ICC) | VDD=2.8V | – | – | 20 | mA |
| LCM Luminous Intensity | – | 300 | – | – | cd/m² |
5.5 -inch 720 x1280 tft display optical parameter
| Item | Symbol | Condition | Min. | Typ. | Max. | Unit |
|---|---|---|---|---|---|---|
| Contrast Ratio | CR | Center point, θ=0° | 800 | – | – | – |
| Response Time (Tr+Tf) | – | Rising (10%→90%) + Falling (90%→10%) | 35 | 40 | – | ms |
| Viewing Angle (CR≥10) | Horizontal (3/9 o’clock) | – | 80 | – | – | Deg. |
| Vertical (12/6 o’clock) | – | 80 | – | Deg. | ||
| Color Gamut (NTSC) | – | CIE1931 | 65 | – | – | % |
| CIE Chromaticity | Red (Rx/Ry) | – | 0.636/0.300 | 0.656/0.320 | 0.676/0.340 | – |
| Green (Gx/Gy) | – | 0.268/0.569 | 0.288/0.589 | 0.308/0.609 | – | |
| Blue (Bx/By) | – | 0.118/0.059 | 0.138/0.079 | 0.158/0.099 | – | |
| White (Wx/Wy) | – | 0.287/0.306 | 0.307/0.326 | 0.327/0.346 | – |
5.5 -inch 720 x1280 tft display dimension and drawing
| Item | Specification | Unit | Remarks |
|---|---|---|---|
| Diagonal Size | 5.5 | inch | TFT LCD panel |
| Module Outline Dimensions (W×H×D) | 70.94 × 129.56 × 1.65 | mm | Tolerance ±0.15mm (excludes adhesive and FPC) |
| Active Area (W×H) | 68.04 × 120.96 | mm | Effective display area |
| Pixel Pitch (W×H) | 0.0945 × 0.0945 | mm | RGB stripe arrangement |
| Backlight Configuration | 12 white LEDs (VLED=19.2V typ., If=40mA) | – | – |
5.5 -inch 720 x1280 tft display Interface Pin Definition
| Pin No. | Symbol | Function Description |
|---|---|---|
| 1 | ID | LCD ID pin (1.8V) |
| 2 | RESET | Global reset pin |
| 3 | TE | Tearing effect output pin (frame synchronization) |
| 4 | VCC 2.8 | Logic power supply (2.6~3.3V) |
| 5~6,9,12,15,18,21,25 | GND | Power Ground |
| 7 | MIPI TDP3 | MIPI-DSI data lane 3 (positive) |
| 8 | MIPI TDN3 | MIPI-DSI data lane 3 (negative) |
| 10 | MIPI TDP2 | MIPI-DSI data lane 2 (positive) |
| 11 | MIPI TDN2 | MIPI-DSI data lane 2 (negative) |
| 13 | MIPI TDP1 | MIPI-DSI data lane 1 (positive) |
| 14 | MIPI TDN1 | MIPI-DSI data lane 1 (negative) |
| 16 | MIPI TDP0 | MIPI-DSI data lane 0 (positive) |
| 17 | MIPI TDN0 | MIPI-DSI data lane 0 (negative) |
| 19 | MIPI TCP | MIPI-DSI clock lane (positive) |
| 20 | MIPI TCN | MIPI-DSI clock lane (negative) |
| 22 | IOVCC1.8 | I/O power supply (1.65~3.3V) |
| 23 | LEDA | LED Anode (positive electrode) |
| 24 | LEDK | LED Cathode (negative electrode) |
5.5 -inch 720 x1280 tft display application cases
Due to the convenience of driving and relatively low price, OLED products are more suitable for use at higher temperatures than TFT LCD because there is no backlight source, such as heating equipment, such as electric soldering iron and heat gun
5.5HD, 720×1280 resolution, 16:9 display ratio suitable for video playback, 65% NTSC, high refresh rate, brightness can be customized, very widely used in mobile phones and handheld devices.