1.54-inch 240x240 tft display

1.54-inch 240×240 display module is widely used in various equipment, the interface has RGB, SPI for choice

 > 1.54-inch 240×240 tft display 8080 interface
1.54-inch tft display

Main parameters of 1.54-inch tft display

ITEMStandard valueUNIT
LCD SIZE1.54INCH
LCD TypeNormally black—
Driver Elementa-Si TFT Active matrix—
Number of Dots240*(RGB)*240Dots
Pixel ArrangementRGB Vertical Stripe—
Pixel Pitch (W*H)0.1155*0.1155mm
Active Area27.72*27.72mm
Glass Area (W*H)30.12*30.12mm
Viewing Directionall view—
Control ICST7789—
Module Size(W*H*T)31.52(W)*33.72(L)*1.9(H)mm
Approx. WeightTBDg
Back LightWhite LED

Download relevant technical documents

ST7789 data sheet for small lcd display

Specification of 1.54-inch small lcd display

Circuit diagram for 1.54-inch small lcd display

Customize the length, width and thickness of FPC or cable, adjust the pin arrangement according to the interface type, and select the appropriate connector. Make your display or circuit board simple and safe with an excellent FPC solution.

A touch screen can be added according to your requirements, there are three options: resistive touch screen, capacitive touch screen, infrared touch screen. Or add protective glass as needed

Display screens with different optical parameters can be designed according to needs, such as brightness, color gamut, response time, gamma and other parameters, and anti-glare, anti-fingerprint coatings, etc. can also be added

The circuit board we designed can convert the interface of your display into an HDMI interface. If your product does not have any display control capabilities, you can use our serial display and only need to use simple commands to control the displayed content through RS232/458

1.54-inch tft display drawings and interfaces

1.54-inch TFT display in IPS mode with a resolution of 240×240. Displays provide crisp, clear visuals and are lightweight and compact enough to be easily integrated into a variety of products without adding extra weight or bulk.
1.54-inch TFT display, IPS mode, resolution 240×240, driver IC ST7789, 4-wire SPI interface, backlight with 3 LED lights in parallel, working voltage 3V, working current 60mA, module brightness 400cd/㎡ , to ensure that the displayed content can be seen clearly even under bright conditions.
The display can be easily integrated into various electronic products such as smart watches, small handheld devices and other wearable electronics. The display is also extremely durable and can withstand harsh environmental conditions., products in line with Rohs standards, FPC and your motherboard through welding connection, You can change to other connection methods, such as ZIF or BTB, according to your needs.The core technical specifications, functional features, interface definitions, electrical/optical parameters, and dimension table are detailed as follows:

1.54-inch tft display Basic Physical & Display Parameters

  • Product Type: 1.54″ TFT LCD Module
  • Resolution: 240(H)RGB × 240(V) pixels
  • Display Size (Diagonal): 1.54 inch
  • Pixel Pitch: 0.1155(H) × 0.1155(V) mm
  • Active Area: 27.72(H) × 27.72(V) mm (square)
  • Module Outline Dimensions: 31.52(H) × 33.72(V) × 1.9(D) mm
  • Pixel Arrangement: RGB Vertical stripe
  • Display Mode: Normally black
  • Display Colors: 262K colors
  • Interface Type: 4 Line SPI
  • Driver IC: ST7789V3
  • Backlight Configuration: 3 White LEDs (parallel connection, Vf=2.8~3.2V, If=60mA typ.)
  • Viewing Direction: All View (best image from any angle)
  • Weight: 2.8 g

1.54-inch tft display Power Supply Specifications

Parameter CategoryDetailsMin. (V)Typ. (V)Max. (V)Unit
Supply VoltageSystem Voltage (VDD)2.52.83.3V
 Gate Driver High Voltage (VGH)12.2–14.97V
 Gate Driver Low Voltage (VGL)-12.5–-7.16V
Current ConsumptionOperating Current (Idd)–810mA
 Sleep-In Mode Current (VDD)–1530μA
 Sleep-In Mode Current (VDDIO)–510μA
Backlight PowerLED Backlight Voltage (VLED)2.83.03.2V
 LED Backlight Current (ILED)–6090mA
 Backlight Power Consumption (Pbl)–180288mW

1.54-inch tft display Optical Specifications

Parameter CategoryDetailsMin.Typ.Max.Unit
Brightness (Lbr)–350400–cd/m²
Luminance Uniformity (∆L)(Min brightness/Max brightness)×100%7075–%
Contrast Ratio (CR)Center point measurement (white/black luminance ratio)700900––
Response Time (Tr+Tf)θ=0°, φ=0°30–40ms
Viewing Angle (CR≥10)All directions (φ=0°/90°/180°/270°)7080–Deg.
Transmittance (with polarizer)–4.44.9–%
CIE ChromaticityWhite (X/Y)0.290/0.3130.320/0.3430.350/0.373–
 Red (X/Y)–0.612/0.327––
 Green (X/Y)–0.334/0.536––
 Blue (X/Y)–0.137/0.150––

1.54-inch tft display drawing and dimension

ItemSpecificationUnitRemarks
Display Size (Diagonal)1.54inchSquare TFT LCD panel
Active Area (H×V)27.72 × 27.72mmEffective display area (square)
Module Outline Dimensions (H×V×D)31.52 × 33.72 × 1.9mmOverall size of the module
Module Outline Tolerance±0.1mmTolerance for overall dimensions (V direction)
Pixel Pitch (H×V)0.1155 × 0.1155mmSpacing between adjacent pixels
Polarizer (POL) Outer Dimension (H)30.12±0.2mmPolarizer size on the display surface
LCD Outer Dimension (H)33.12±0.1mmLCD panel outer size
FPC Bending Protrusion Height≤0.50mmMaximum height when FPC bends out of backlight frame
Key Position Dimensions5.25±0.3 / 13.00±0.3 / 11.00±0.5mmReference positions for assembly (as per mechanical drawing)
LED Pad Spacing2.00±0.3mmSpacing between LED anode/cathode pads
1.54 inch TFT LCD drawing

Interfaces are defined as follows:

Pin No.SymbolFunction Description
1GNDPower Ground
2LEDKLED Cathode (backlight negative electrode)
3LEDALED Anode (backlight positive electrode)
4VDDAnalog Power Supply (2.5V~3.3V)
5GNDPower Ground
6GNDPower Ground
7D/CDisplay data/command selection pin (4-line serial interface)
8CSChip selection pin (low enable, high disable)
9SCLSerial interface clock pin (data latched on rising edge)
10SDASPI interface input/output pin
11RESETDevice reset pin (active low; required for proper chip initialization)
12GNDPower Ground

1.54 -inch 240x240 tft display application cases

手表

The 1.54 “240×240 resolution tft display is designed to make smartwatches. It’s almost square shape fits the impression of a watch, and it is now widely used in the field of children’s watches.

The 1.54-inch tft display, which is also used in dash-recorders and radar detectors, has a dimension of 31.52(W)*33.72(L)*1.9(H), allowing enough room to fit on a small device. It also has a color screen, showing more content than OLED screens.

行车记录 1
Scroll to Top