1.3-inch 320x320 circular display

1.3-inch circular lcd display, mipi interface, using ST7796 driver IC, IPS mode. can be applied to smaller-sized devices.

 > 1.3-inch 320×320 tft display, SPI interface, Circular display
1.3-inch-cirular-display

Main parameters of 1.3-inch circular screen

ITEMStandard valueUNIT
LCD SIZE1.3INCH
LCD Type IPS mode—
Driver Element a-Si TFT Active matrix—
Number of Dots320*(RGB)*320Dots
Pixel ArrangementRGB Vertical Stripe—
Pixel Pitch (W*H)0.219*0.219mm
Active Area33.12mm
Viewing Directionall view direction—
Control ICST7796—
Module Size(W*H*T)36.12(W)*39.16(L)*1.5(H)mm
Back LightWhite LED

Download relevant technical documents

ST7796 data sheet for small lcd display

Specification of 1.3-inch small lcd display

Customize the length, width and thickness of FPC or cable, adjust the pin arrangement according to the interface type, and select the appropriate connector. Make your display or circuit board simple and safe with an excellent FPC solution.

A touch screen can be added according to your requirements, there are three options: resistive touch screen, capacitive touch screen, infrared touch screen. Or add protective glass as needed

Display screens with different optical parameters can be designed according to needs, such as brightness, color gamut, response time, gamma and other parameters, and anti-glare, anti-fingerprint coatings, etc. can also be added

The circuit board we designed can convert the interface of your display into an HDMI interface. If your product does not have any display control capabilities, you can use our serial display and only need to use simple commands to control the displayed content through RS232/458

1.3-inch round lcd drawings and interfaces

The 1.3″ TFT LCD Module is a high-performance display module integrated with a TFT LCD panel, driver IC (ST7796DW), FPC, and white LED backlight unit. It features a square active area, MIPI Video mode (1 Lane) interface for high-speed data transmission, high brightness, and wide operating temperature range, suitable for smart wearables, portable devices, industrial control panels, and other miniaturized display scenarios. The core technical specifications, functional features, interface definitions, electrical/optical parameters, and dimension table are detailed as follows:

1.3-inch round lcd Core Technical Specifications

  • Product Type: 1.3″ TFT LCD Module
  • Resolution: 320(H)×3(RGB)×320(V) pixels
  • Display Size (Diagonal): 1.3 inch
  • Active Area: 33.12(H)×33.12(V) mm (square)
  • Module Outline Dimensions: 36.12(H)×39.16(V)×1.50(D) mm
  • Display Mode: Normally black
  • Viewing Direction: Full O’clock (all directions)
  • Interface Type: MIPI Video mode (1 Lane)
  • Driver IC: ST7796DW
  • Backlight Configuration: White LED (Vf=3.2V, If=40mA typ.)
  • Touch Panel: No
  • Connector: FH12-16S-0.5SH

1.3-inch round lcd Power Supply Specifications

Parameter CategoryDetailsMin. (V)Typ. (V)Max. (V)Unit
Supply VoltageAnalog Power (VCI)2.502.803.30V
 Interface Logic Power (IOVCC)1.651.803.30V
 TFT Gate On Voltage (VGH)10.0–16.0V
 TFT Gate Off Voltage (VGL)-16.0–-10.0V
Backlight PowerLED Forward Voltage (Vf)–3.2–V
 LED Forward Current (If)–40–mA

1.3-inch round lcd Optical Specifications (Ta=25℃, dark room, ambient luminance 1lux)

Parameter CategoryDetailsMin.Typ.Max.Unit
Brightness (Lv)If=40mA–350–cd/m²
Contrast Ratio (CR)θ=0°, center point measurement9001100––
Response Time (Tr+Tf)Rising + Falling time30–35ms
Color Gamut (CG)––35–%
Transmittance (Tr)Without APF and CG4.184.65–%
Viewing Angle (CR≥10)Horizontal (3/9 o’clock)80––Deg.
 Vertical (6/12 o’clock)80––Deg.
CIE ChromaticityWhite (Wx/Wy)–0.300/0.326––
 Red (Rx/Ry)–0.655/0.327––
 Green (Gx/Gy)–0.284/0.594––
 Blue (Bx/By)–0.138/0.111––

The drawing of 1.3-inch round lcd 

1.3 inch drawing
ItemSpecificationUnitRemarks
Display Size (Diagonal)1.3inchSquare TFT LCD panel
Active Area (H×V)33.12 × 33.12mmEffective display area (square)
Module Outline Dimensions (H×V×D)36.12 × 39.16 × 1.50mmOverall size of the module
Connector TypeFH12-16S-0.5SH–16-pin FPC connector
PI Stiffener Thickness0.80mmReinforcement for FPC (as per mechanical drawing)
Module Outline Tolerance±0.2mmTolerance for overall dimensions
Active Area Tolerance±0.3mmTolerance for effective display area

Interfaces are defined as follows:

Pin No.SymbolFunction Description
1LED_ALED Anode (3.2V, 40mA typ.)
2LED_KLED Cathode
3GNDPower Ground
4D0_NNegative polarity of low voltage differential data signal (MIPI)
5D0_PPositive polarity of low voltage differential data signal (MIPI)
6GNDPower Ground
7DCLK_NNegative polarity of low voltage differential clock signal (MIPI)
8DCLK_PPositive polarity of low voltage differential clock signal (MIPI)
9GNDPower Ground
10RESXReset Pin (active low, required for initialization)
11GNDPower Ground
12TETearing effect output pin (synchronize frame writing; open if not used)
13GNDPower Ground
14IOVCCInterface Logic Power (1.65V~3.3V)
15VCIAnalog Power (2.50V~3.30V)
16GNDPower Ground
Scroll to Top