8-inch 800x1280, sunlight readable display
8-inch 800×1280 tft display, IPS mode, high brightness display, 600cd/㎡, sunlight readable display.
Main parameters of 8-inch sunlight readable display
| ITEM | Standard value | UNIT |
| LCD SIZE | 8 | INCH |
| LCD Type | TFT Negative Transmissive | — |
| Driver Element | a-Si TFT Active matrix | — |
| Number of Dots | 800(H)*3(RGB)* 1280(V) | Dots |
| Pixel Arrangement | RGB Vertical Stripe | — |
| Pixel Pitch (W*H) | 0.219*0.219 | mm |
| Active Area | 114.70(H) * 184.20(V) * 2.65(D) | mm |
| Viewing Direction | all view direction | — |
| Control IC | JD9365 | — |
| Module Size(W*H*T) | 8.6(W)*29.80(L)*1.5(H) | mm |
| Back Light | White LED | |
Download relevant technical documents
Customize the length, width and thickness of FPC or cable, adjust the pin arrangement according to the interface type, and select the appropriate connector. Make your display or circuit board simple and safe with an excellent FPC solution.
A touch screen can be added according to your requirements, there are three options: resistive touch screen, capacitive touch screen, infrared touch screen. Or add protective glass as needed
Display screens with different optical parameters can be designed according to needs, such as brightness, color gamut, response time, gamma and other parameters, and anti-glare, anti-fingerprint coatings, etc. can also be added
The circuit board we designed can convert the interface of your display into an HDMI interface. If your product does not have any display control capabilities, you can use our serial display and only need to use simple commands to control the displayed content through RS232/458
8-inch tft display drawings and interfaces
8-inch TFT display in IPS mode with a resolution of 800×1280 pixels. The driver IC used is JD9365, which supports MIPI interface.
The display uses 18 LED lamp beads as the backlight, and every 3 LEDs have two configurations of series and parallel. The design optimizes the drive voltage from 23V to 27V while maintaining a current of 75mA. The highest brightness can reach 600cd/㎡, presenting vivid and vibrant visual effects.
With an operating temperature range of -20°C to 70°C, our displays are designed to perform reliably in a variety of environments. Its storage temperature range of -30°C to 80°C further enhances its durability and longevity.
In addition, whether it is optical parameters, touch screen, FPC, connectors or other accessories, we especially support product customization, because we understand the importance of this to you, and an lcd module product that suits your design can reduce your work even more.
The outline drawing is as follows:
Interfaces are defined as follows：
