8.8-inch 480x1920 tft display，Strip display
8.8-inch 480×1920 tft display, MIPI interface, 16.7M colors, using IPS display technology, all view direction
Main parameters of 8.8-inch tft display
| ITEM | Standard value | UNIT |
| LCD SIZE | 8.8 | INCH |
| LCD Type | TFT Negative Transmissive | — |
| Driver Element | a-Si TFT Active matrix | — |
| Number of Dots | 480*(RGB)*1920 | Dots |
| Pixel Arrangement | RGB Vertical Stripe | — |
| Pixel Pitch (W*H) | 0.114*0.114 | mm |
| Active Area | 54.72*218.88 | mm |
| Viewing Direction | all view clock | — |
| Control IC | OTA7290B | — |
| Module Size(W*H*T) | 64.3(W)*231.3(H)*4.8(T) | mm |
| Back Light | White LED | |
Download relevant technical documents
FPC/cable/interface customization
Customize the length, width and thickness of FPC or cable, adjust the pin arrangement according to the interface type, and select the appropriate connector. Make your display or circuit board simple and safe with an excellent FPC solution.
Touch screen or cover glass added
A touch screen can be added according to your requirements, there are three options: resistive touch screen, capacitive touch screen, infrared touch screen. Or add protective glass as needed
Customized Display Optical Parameters
Display screens with different optical parameters can be designed according to needs, such as brightness, color gamut, response time, gamma and other parameters, and anti-glare, anti-fingerprint coatings, etc. can also be added
Customized HDMI to MIPI, RGB, LVDS boards
The circuit board we designed can convert the interface of your display into an HDMI interface. If your product does not have any display control capabilities, you can use our serial display and only need to use simple commands to control the displayed content through RS232/458
8.8-inch tft display drawings and interfaces
The 8.8-inch long display screen has a resolution of 800×1280 pixels, adopts IPS display mode, and supports omnidirectional viewing angles. It adopts OTA7290 driver IC and supports MIPI interface.
The working voltage of the backlight unit of this display is 17.5V, the current is 160mA, and the brightness is as high as 600cd/m². If you have higher requirements for brightness, please contact us. Operating temperature -20°C to 70°C. Storage temperature -30°C to 80°C.
We also offer custom options to meet your specific needs. This includes support for touch screen integration, FPC (Flexible Printed Circuit), connectors and even optical parameters. Our goal is to provide you with a tailor-made solution, seamlessly integrated into your project or application.
The outline drawing is as follows:
Interfaces are defined as follows：
| Pin | Symbol | Detail |
| 1 | NC | |
| 2 | VDD | Power supply(3.3V) |
| 3 | IOVDD | Power supply(1.8/3.3V) |
| 4 | GND | |
| 5 | RESET | LCM reset pin |
| 6 | NC | |
| 7 | GND | |
| 8 | DSI-D0N | MIPI-DSI data Lane |
| 9 | DSI-D0P | MIPI-DSI data Lane |
| 10 | GND | |
| 11 | DSI-D1N | MIPI-DSI data Lane |
| 12 | DSI-D1P | MIPI-DSI data Lane |
| 13 | GND | |
| 14 | DSI-CLKN | MIPI-DSI data Lane |
| 15 | DSI-CLKP | MIPI-DSI data Lane |
| 16 | GND | |
| 17 | DSI-D2N | MIPI-DSI data Lane |
| 18 | DSI-D2P | MIPI-DSI data Lane |
| 19 | GND | |
| 20 | DSI-D3N | MIPI-DSI data Lane |
| 21 | DSI-D3P | MIPI-DSI data Lane |
| 22 | GND | |
| 23 | NC | |
| 24 | NC | |
| 25 | GND | |
| 26 | NC | |
| 27 | PWMO | PWM control signal for LED driver(CABC) |
| 28 | NC | |
| 29 | NC | |
| 30 | GND | |
| 31 | LEDK | Backlight power supply |
| 32 | LEDK | Backlight power supply |
| 33 | NC | |
| 34 | NC | |
| 35 | NC | |
| 36 | NC | |
| 37 | NC | |
| 38 | NC | |
| 39 | LEDA | Backlight power supply |
| 40 | LEDA | Backlight power supply |
