64x64 COG Display Character Module
LCD module 64×64 COG display character module, the driver IC adopts ST7567, and adopts 4-wire SPI serial interface.
64x64 COG display character module parameters
Customize the length, width and thickness of FPC or cable, adjust the pin arrangement according to the interface type, and select the appropriate connector. Make your display or circuit board simple and safe with an excellent FPC solution.
A touch screen can be added according to your requirements, there are three options: resistive touch screen, capacitive touch screen, infrared touch screen. Or add protective glass as needed
Display screens with different optical parameters can be designed according to needs, such as brightness, color gamut, response time, gamma and other parameters, and anti-glare, anti-fingerprint coatings, etc. can also be added
The circuit board we designed can convert the interface of your display into an HDMI interface. If your product does not have any display control capabilities, you can use our serial display and only need to use simple commands to control the displayed content through RS232/458
64x64 COG Display Character Module drawings and interfaces
64×64 COG display character module, which uses the revolutionary ST7567A driver IC. A 4-wire SPI interface is supported. The module is stable for operation from -20°C to +70°C and for storage at
-30°C to +80°C. With this wide temperature capability, the 64×64 COG display character module is a solid companion for many industry applications such as automotive and industrial automation.
The 64×64 COG display character module uses two LED lamp beads connected in parallel, with a driving voltage of 3V and a driving current of 30mA, and the power consumption of the whole module is less than 100mW. The backlight can be turned off in a bright environment, and the power consumption at this time is only 1~2mW, which is very suitable for products with ultra-long standby time.
The outline drawing is as follows:
Interfaces are defined as follows：
|2||RST||Low level reset, after the reset is completed, |
return to high level, the LCD module starts to work
|3||RS||H: data register 0: instruction register|
|6||VDD||Positive pole of power supply|
|10||VLCD||LCD double voltage output|
|11||LEDK||Backlight power supply|
|12||LEDA||Backlight power supply|