64x32 COG Display Character Module
LCD module 64×32 COG display character module, the driver IC adopts ST7567, and adopts 4-wire SPI serial interface.
Download 64x32 COG Display Character Module technical documents
Customize the length, width and thickness of FPC or cable, adjust the pin arrangement according to the interface type, and select the appropriate connector. Make your display or circuit board simple and safe with an excellent FPC solution.
A touch screen can be added according to your requirements, there are three options: resistive touch screen, capacitive touch screen, infrared touch screen. Or add protective glass as needed
Display screens with different optical parameters can be designed according to needs, such as brightness, color gamut, response time, gamma and other parameters, and anti-glare, anti-fingerprint coatings, etc. can also be added
The circuit board we designed can convert the interface of your display into an HDMI interface. If your product does not have any display control capabilities, you can use our serial display and only need to use simple commands to control the displayed content through RS232/458
64x32 COG Display Character Module drawings and interfaces
The 64×32 character LCD module is equipped with ST7567 driver IC and supports 4-wire SPI interface, which is a widely used interface.
32 columns * 64 lines dot matrix monochrome picture or display 16 * 16 dot matrix Chinese characters 4 * 2 lines, or display 8 * 16 dot matrix English, numbers, symbols 8 * 2 lines. Or display 12*4 lines of English, numbers and symbols in 5*8 dot matrix.
The 64×32 character liquid crystal module adopts LED backlight, the working voltage of the backlight is 3V, and the working current is set to 20mA. The operating temperature range is -20°C to 70°C. Storage temperature is -30°C to 80°C.
The outline drawing is as follows:
Interfaces are defined as follows：
| NO. | Symbol | Detail |
| 1 | LEDA | Backlight power supply |
| 2 | LEDK | Backlight power supply |
| 3 | VLCD | LCD double voltage output |
| 4 | VB1+ | |
| 5 | VB1- | |
| 6 | VSS | Ground |
| 7 | VDD | Positive pole of power supply |
| 8 | SDA | serial data |
| 9 | SCLK | serial clock |
| 10 | RS | H: data register 0: instruction register |
| 11 | RST | Low level reset, after the reset is completed, return to high level, the LCD module starts to work |
| 12 | CS | Chip Select |
