3.83-inch 132x320 PMOLED Display Module
3.83 132×320 OLED Display Module, SPI interface, Display Mode: Passive Matrix, Display Color: Monochrome
Main parameters of 3.83-inch PMOLED Display Module
| ITEM | Standard value | UNIT |
| Display SIZE | 3.83 | INCH |
| Display Type | PMOLED | — |
| Driver Element | Passive Matrix | — |
| Number of Dots | 132*320 | Dots |
| Display Color | Monochrome (White） | — |
| Pixel Pitch (W*H) | 0.26*0.26 | mm |
| Active Area | 37.072*89.9 (mm) | mm |
| Viewing Direction | all direction | — |
| Control IC | SSD1320 | — |
| Panel Size(W*H*T) | 41.672(W)*145.52(L)*2.027(H) | mm |
Download relevant technical documents
SSD1320 data sheet for small oled display
Specification of 3.83-inch small oled display
Circuit diagram of 3.83-inch small oled display
FPC/cable/interface customization
Customize the length, width and thickness of FPC or cable, adjust the pin arrangement according to the interface type, and select the appropriate connector. Make your display or circuit board simple and safe with an excellent FPC solution.
Touch screen or cover glass added
A touch screen can be added according to your requirements, there are three options: resistive touch screen, capacitive touch screen, infrared touch screen. Or add protective glass as needed
Customized Display Optical Parameters
Display screens with different optical parameters can be designed according to needs, such as brightness, color gamut, response time, gamma and other parameters, and anti-glare, anti-fingerprint coatings, etc. can also be added
Customized HDMI to MIPI, RGB, LVDS boards
The circuit board we designed can convert the interface of your display into an HDMI interface. If your product does not have any display control capabilities, you can use our serial display and only need to use simple commands to control the displayed content through RS232/458
3.83-inch OLED Display drawings and interfaces
3.83-inch OLED, resolution 132×320, display content is white, due to the size and resolution problems, this display uses two driver IC working mode, brightness is 100cd/m², Angle of view 160°. The display FPC adopts plug-in FPC, which supports length, interface definition, and shape customization.
The outline drawing is as follows:
Interfaces are defined as follows：
| Pin | Symbol | Detail |
| 1 | VCC | Power supply for panel driving voltage |
| 2 | VCOMH | COM signal deselected voltage level. |
| 3 | VSL | This is segment voltage (output low level) reference pin. |
| 4 | VLSS | Analog system ground pin. |
| 5 | VP | This pin is the segment pre-charge voltage reference pin. |
| 6 | VDD | Power supply pin for core logic operation. |
| 7 | FR | This pin outputs RAM write synchronization signal. |
| 8 | CS | This pin is the chip select input connecting to the MCU. (active LOW) |
| 9 | RES | This pin is reset signal input. |
| 10 | DC | This pin is Data/Command control pin connecting to the MCU. |
| 11 | D0 | The serial clock input: SCLK. |
| 12 | D1 | The serial data input: SDIN. |
| 13 | VSS | GRAND |
| 14 | VLSS | Analog system ground pin. |
| 15 | IREF | This pin is the segment output current reference pin. |
| 16 | VCC | Power supply for panel driving voltage. |
