0.96-inch 96x96 PMOLED Display Module
0.96 96×96 PMOLED Display Module, Display Mode: Passive Matrix, Display Color: Monochrome (White)
Main parameters of 0.96-inch PMOLED Display Module
|Number of Dots
|Pixel Pitch (W*H)
Download relevant technical documents
Specification of 0.96-inch small oled display
Circuit diagram of 0.96-inch small oled display
initial code for 0.96-inch small oled display
Customize the length, width and thickness of FPC or cable, adjust the pin arrangement according to the interface type, and select the appropriate connector. Make your display or circuit board simple and safe with an excellent FPC solution.
Touch screen or cover glass added
A touch screen can be added according to your requirements, there are three options: resistive touch screen, capacitive touch screen, infrared touch screen. Or add protective glass as needed
Customized Display Optical Parameters
Display screens with different optical parameters can be designed according to needs, such as brightness, color gamut, response time, gamma and other parameters, and anti-glare, anti-fingerprint coatings, etc. can also be added
Customized HDMI to MIPI, RGB, LVDS boards
The circuit board we designed can convert the interface of your display into an HDMI interface. If your product does not have any display control capabilities, you can use our serial display and only need to use simple commands to control the displayed content through RS232/458
0.96-inch OLED Display drawings and interfaces
The 0.96-inch monochrome OLED display has a resolution of 96×96 and can display white content. The display driver IC is SSD1306, which supports I2C interface, 6800/8080 interface and SPI interface.
With a 21.74mm x 10.86mm active area, the display provides plenty of room to present your content clearly and precisely. The display is connected by welding FPC. The entire module only needs 3V power supply, and the viewing angle of the OLED display is very good, and there will be no color deviation when viewed from a large angle. Moreover, the working and storage temperature of the OLED display is higher than that of the TFT LCD, which is suitable for working in a more extreme environment.
The outline drawing is as follows:
Interfaces are defined as follows：
|Power Supply for Logic
|This is a voltage supply pin. It must be connected to external source
|Current Reference for Brightness Adjustment
|This pin is reset signal input. When the pin is low, initialization of the chip is
executed. Keep this pin pull high during normal operation.
Serial Clock Input Singal
|Serial Data Input Signal
0.96 -inch 96 x96 OLED application cases
Due to the convenience of driving and relatively low price, OLED products are more suitable for use at higher temperatures than TFT LCD because there is no backlight source, such as heating equipment, such as electric soldering iron and heat gun
Small instruments and other products that do not need to display complex data and images are also suitable for using monochrome OLED. Monochrome OLED can be thinner, and fewer leads, which can take up less of your CPU’s I/O port