0.86-incd 96x32 PMOLED Display Module

0.86 96×32 PMOLED Display Module, Display Mode: Passive Matrix, Display Color: Monochrome (White)

 > 0.86-inch 96×32 oled display, IIC interface
0.86-OLED display

Main parameters of 0.86inch PMOLED Display Module

ITEM Standard value UNIT
Display SIZE 0.86 INCH
Display Type  PMOLED
Driver Element Passive Matrix
Number of Dots 96*32 Dots
Display Color  Monochrome (White)
Pixel Pitch (W*H) 0.22*0.19 mm
Active Area 21.1*6.06 mm
Viewing Direction all direction
Control IC SSD1316
Panel Size(W*H*T) 9.2(W)*21.9(L)*1.22(H) mm

Download relevant technical documents

SSD1316 data sheet for small oled display

Specification of 0.86-inch small oled display

Circuit diagram of 0.86-inch small oled display

initial code for 0.86-inch small oled display

Customize the length, width and thickness of FPC or cable, adjust the pin arrangement according to the interface type, and select the appropriate connector. Make your display or circuit board simple and safe with an excellent FPC solution.

A touch screen can be added according to your requirements, there are three options: resistive touch screen, capacitive touch screen, infrared touch screen. Or add protective glass as needed

Display screens with different optical parameters can be designed according to needs, such as brightness, color gamut, response time, gamma and other parameters, and anti-glare, anti-fingerprint coatings, etc. can also be added

The circuit board we designed can convert the interface of your display into an HDMI interface. If your product does not have any display control capabilities, you can use our serial display and only need to use simple commands to control the displayed content through RS232/458

0.86-inch OLED Display drawings and interfaces

0.86-inch monochrome OLED display with a resolution of 96×32 pixels displays content in white. The display is powered by a reliable SSD1316 driver IC and supports an I2C serial interface. FPC adopts soldering method without connectors.

Due to the inherent self-luminous nature of OLED technology, our display does not require an additional backlight and only requires a 3V power supply to function properly. The OLED panel offers excellent viewing angles, ensuring excellent visibility in all directions. And because there is no liquid crystal component, it can work stably at more extreme temperatures.

The outline drawing is as follows:

Interfaces are defined as follows:

PinSymbolDetail
1C2PData transmission line
2C2NData transmission line
3C1PData transmission line
4C1NData transmission line
5VBATPower Supply for DC/DC Converter Circuit
6VBREFNC
7VSSThis is a ground pin. It acts as a reference for the logic pins. It must be connected to external ground
8VDDThis is a voltage supply pin. It must be connected to external source
9RESThis pin is reset signal input. When the pin is low, initialization of the chip is executed. Keep this pin pull high during normal operation.
10SCLIIC Bus Clock Signal
11SDAI2C Bus Data Signal
12IREFCurrent Reference for Brightness Adjustment
13VCOMH 
14VCCThis is the most positive voltage supply pin of the chip. A stabilization capacitor should be connected between this pin and VSS when the converter is used. It must be connected to external source when the converter is not used. 

Recent OLED Products

Scroll to Top